How to Prepare a Piece of Furniture for Painting with Fusion Mineral Paint: A Step-by-Step Guide

That piece of furniture you've been staring at for months, thinking "it's missing something"... today, we're giving it a second life. With Fusion Mineral Paint, transforming furniture isn't just about painting—it's about restoring the soul it deserves. And the good news: it's easier than you think.

Here's exactly how to do it, step-by-step, without complications.

✦ Before you start: preparation is everything

The difference between a mediocre result and one you'll love is in how you prepare the surface. Don't skip this step—we promise.

• Clean thoroughly: Degreaser or soap and water. No grease, no dust, no excuses. Let it dry completely.
• Sand lightly: 150-220 grit, just to break the sheen. No need to get down to bare wood.
• Repair as needed: Dents, cracks, scratches—wood filler, sand, and you're good to go.
• Primer? Fusion has incredible adhesion, so in most cases, you don't need it. Only on very lacquered or glossy surfaces is it worth adding.

✦ The magic: painting with Fusion Mineral Paint

This is where the transformation begins. Fusion Mineral Paint is a forgiving paint that covers well and provides beautiful matte finishes. Here's how:

• First thin, even coat—brush or sponge roller. Don't overload.
• Wait 1-2 hours and apply the second coat. You'll see the color come to life.
• Want a distressed effect? Lightly sand between coats to create that popular vintage look.
• Dark colors over light: you might need a third coat. Be patient—the result is worth it.

✦ The finishing touch: protect for durability

One of the things we love most about Fusion is that it has a built-in topcoat in the paint itself. For many pieces of furniture, you won't need anything else. But if the furniture will see heavy use—a table, a chair, a countertop—add a layer of protection from our Fusion Mineral Paint Essentials collection:

• Fusion Wax: smooth, silky finish, with a pleasant feel.
• Fusion Top Coat: for high-traffic surfaces that need maximum durability.

Apply with a soft cloth in circular motions and allow to cure for 24-48 hours before use. Full curing takes 21 days—during that time, treat it gently.

✦ Small secrets that make a difference

• Work between 15°C and 25°C—extreme cold and heat are not friends of paint.
• Ventilate the area well while working.
• Clean brushes with soap and water immediately after finishing—Fusion is water-based and cleans easily if you don't let it dry.
• And most importantly: enjoy the process. Each coat is one step closer to the furniture you envisioned.

Do you have questions or want to tell us about your project? Write to us—we love to see the transformations you create with our products. 🖤